Ademco Wireless Smoke Detector-Photoelectronic - 5808W3 "Most Popular Smoke and Heat Combination Sensor"

5808W3

Our Most Popular Wireless Smoke Heat Sensor. Capable of Sensing Pre-Freeze Conditions if the Temperature is Below 41 Degree F.

Watchdog Price: $89.79

Quantity

Add to a new shopping list

Detailed Description

Ademco Wireless Smoke Detector-Photoelectronic-5808W3 Our "Most Popular Combination Smoke-Heat Sensor"

Honeywell/Ademco's 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800 Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required).

The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system's receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke-virtually eliminating nuisance alarms.

Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist.

All models also feature a restorable, built-in, fixed temperature (135 F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41 F.

Features:

Wireless photoelectric smoke and heat detector combination that is set off when temperatures reach 135 F.

Well suited for locations that are difficult to wire, situations where room aesthetics are important and places where hazardous materials exist

The ultimate in installation adaptability

This amazingly cost-effective, good-looking, low profile unit matches easily with any decor and supplies benefits seldom found in smoke detectors of this low price range. Utilizing Smart Check™ remote maintenance reporting, the unit automatically sends an alert to the central station when it needs service, and its built-in drift compensation continuously corrects sensitivity changes caused by dust. The 5808W3 is UL 268 listed as being suitable for use in both commercial and residential areas.

Dimensions

Diameter: 5.3", Height: 2.30"

Weight 8.5 ounces (without batteries)

Operating Temperature -32100 F (037.8 C)

Humidity Range 0% to 95% RH, non-condensing

Air Velocity 1,000 ft./min. max.

Operating Voltage 2.53.6VDC

Standby Current 8.5 Ã¬A avg.

Alarm Current 35 mA max.

Power Source One 3V CR123A lithium Battery

Audible Output 85dB min. @ 10 ft.

Fixed Temperature Heat Sensor 135 F Fixed

Agency Listings UL268 Commercial and Residential

Let Watchdog's Free, Friendly Technical Support Team help you Design and Install your System Today!

Additional Information

More Info: